### smartctl_all ### command: bash -lc if command -v smartctl >/dev/null; then smartctl --scan | awk "{print \$1}" | while read -r d; do echo "--- $d"; smartctl -a "$d"; done; fi --- /dev/sda smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HT25T1Q512G-CGP1 Serial Number: 20240707123045 Firmware Version: F3C1I181 User Capacity: 512,110,190,592 bytes [512 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:08 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0005) SCT Status supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 095 100 000 Old_age Always - 1313 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 641 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2530 163 Unknown_Attribute 0x0032 099 100 000 Old_age Always - 162 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 82390 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 125 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 68 167 Unknown_Attribute 0x0032 093 100 000 Old_age Always - 88 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 95 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 095 100 010 Pre-fail Always - 95 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 1415378 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 38119 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdb smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112085 LU WWN Device Id: 5 4851d0 000015780 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 133 100 090 Pre-fail Always - 2585593905602 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 24 (Min/Max 22/32) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1050693 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdc smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112152 LU WWN Device Id: 5 4851d0 000015847 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 133 100 090 Pre-fail Always - 2585593905602 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 23 (Min/Max 22/32) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1051178 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdd smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112148 LU WWN Device Id: 5 4851d0 000015843 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 144 100 090 Pre-fail Always - 2787457368514 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 24 (Min/Max 22/33) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1052643 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sde smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112285 LU WWN Device Id: 5 4851d0 000015980 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 133 100 090 Pre-fail Always - 2585593905602 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 24 (Min/Max 23/33) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1050316 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdf smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112286 LU WWN Device Id: 5 4851d0 000015981 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 136 100 090 Pre-fail Always - 2637133513154 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 24 (Min/Max 22/32) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1051663 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdg smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112277 LU WWN Device Id: 5 4851d0 000015972 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 169 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 136 100 090 Pre-fail Always - 2637133513154 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 23 (Min/Max 21/32) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1052784 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdh smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112151 LU WWN Device Id: 5 4851d0 000015846 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 133 100 090 Pre-fail Always - 2585593905602 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 23 (Min/Max 22/31) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 251895 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdi smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112291 LU WWN Device Id: 5 4851d0 000015986 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 136 100 090 Pre-fail Always - 2637133513154 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 25 (Min/Max 23/32) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 252543 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdj smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112289 LU WWN Device Id: 5 4851d0 000015984 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 139 100 090 Pre-fail Always - 2688673120706 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 24 (Min/Max 22/31) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 252521 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdk smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112244 LU WWN Device Id: 5 4851d0 000015939 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 169 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 136 100 090 Pre-fail Always - 2637133513154 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 24 (Min/Max 22/31) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 252399 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdl smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112153 LU WWN Device Id: 5 4851d0 000015848 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 169 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 139 100 090 Pre-fail Always - 2688673120706 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 25 (Min/Max 22/33) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 268169 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/sdm smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XITC SS6000SES327-480GB Serial Number: SX014805952112242 LU WWN Device Id: 5 4851d0 000015937 Firmware Version: F6600002 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 4 18:01:09 2026 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x000d) SCT Status supported. SCT Error Recovery Control supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 169 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 63 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 165 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0033 139 100 090 Pre-fail Always - 2688673120706 177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 100 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0023 100 100 001 Pre-fail Always - 24 (Min/Max 22/31) 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 100 232 Available_Reservd_Space 0x0033 100 100 001 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 253888 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary --- /dev/bus/24 smartctl 7.1 2019-12-30 r5022 [aarch64-linux-4.19.90-24.4.v2101.ky10.aarch64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/bus/24: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary